Announcement PDF ASX:CPO OTCQB:CPORF ASX ANNOUNCEMENT 7 OCTOBER 2025 HIGH-GRADE, NEAR-SURFACE COPPER INTERSECTED AT LA FLORIDA Culpeo Minerals Limited (Culpeo or the Company) (ASX: CPO, OTCQB: CPORF) is pleased to report multiple zones of high-grade, near-surface copper mineralisation as part of its maiden drilling program at the La Florida Prospect, located within its Fortuna Project (Fortuna) in Chile. HIGHLIGHTS • Multiple high-grade intercepts confirm shallow copper mineralisation at La Florida: • 6.65m @ 1.03% Cu from 14.00m in hole CMLFD002, including; • 4.40m @ 1.44% Cu from 15.00m; and • 1.90m @ 0.88% Cu from 65.50m in hole CMLFD002 • 13.60m @ 0.88% Cu from 4.00m in hole CMLFD005; including • 6.10m @ 1.35% Cu from 10.00m; and • 16.00m @ 0.70% Cu from 107.00m in hole CMLFD005; including • 7.47m @ 1.36% Cu from 115.00m; and • 1.95m @ 3.49% Cu from 121.50m; and • 0.49m @ 4.19% Cu from 121.50m. • 1.00m @ 1.37% Cu from 76.00m in hole CMLFD006; • 3.00m @ 0.61% Cu from 49.60m in hole CMLFD008; including • 0.50m @ 1.84% Cu from 51.00m in hole CMLFD008. Culpeo Minerals’ Interim Executive Chair, Geoff McNamara commented: “Drilling at La Florida has outlined mineralisation on what we believe to be the edge of a new porphyry system. These are the first drill holes ever completed on this target, the results are highly encouraging and provide important vectors to guide the next phase of drilling. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 2 Figure 1: Location of the La Florida Prospect. 2,3,4,5,6,7,8,9,10,14,15,16, FORTUNA PROJECT (80% CULPEO)11 Fortuna lies within the Coastal Cordillera, a prolific porphyry belt that hosts multiple major copper deposits and is approximately 25km north of the Company’s Lana Corina Project which hosts numerous historical, small-scale workings that targeted near-surface, high- grade mineralisation. Culpeo’s maiden eight hole diamond drilling program at the La Florida Project was designed to test multiple zones of high-grade copper mineralisation within a 1.7km by 500m structural corridor. Assay results have been returned from all eight diamond drillholes, with four returning significant high-grade intercepts (Figure 2). Samples were analysed for copper (Cu), gold (Au), silver (Ag) and molybdenum (Mo). Silver grades of up to 5.19g/t were also intersected. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 3 Figure 2: Schematic interpretation of a porphyry system, the green shaded areas showing the interpreted zones intersected in the current round of drilling. Drilling has confirmed the presence of a copper bearing, porphyry-style system hosted in lithologies comparable to those at the Company’s nearby Lana Corina discovery. The mineralisation encountered is characterised by porphyry-style veining, alteration, and elevated copper and silver geochemistry, features consistent with the central zones of productive copper porphyry systems (refer to Figure 3). Notable high-grade intercepts include: • 6.65m @ 1.03% Cu from 14.00m in hole CMLFD002 (Figure 4), including; • 4.40m @ 1.44% Cu from 15.00m; and • 1.90m @ 0.88% Cu from 65.50m in hole CMLFD002 • 13.60m @ 0.88% Cu from 4.00m in hole CMLFD005 (Figure 5); including • 6.10m @ 1.35% Cu from 10.00m; and • 16.00m @ 0.70% Cu from 107.00m in hole CMLFD005 (Figure 5); including • 7.47m @ 1.36% Cu from 115.00m; and • 1.95m @ 3.49% Cu from 121.50m; and • 0.49m @ 4.19% Cu from 121.50m. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 4 Figure 3: Location of completed diamond drillholes at La Florida. Datum PSAD56 19S ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 5 Figure 4: Section showing high-grade intercepts from diamond drillhole CMLFD002, purple interpreted to be andesitic porphyry. Additional intercepts returned, included: • 1.00m @ 1.37% Cu from 76.00m in hole CMLFD006; • 3.00m @ 0.61% Cu from 49.60m in hole CMLFD008; including • 0.50m @ 1.84% Cu from 51.00m in hole CMLFD008. First ever drilling at this target confirms copper mineralisation on the interpreted margins of a porphyry system, opening the potential for larger, higher-grade zones along strike and at depth. Drilling is underway to test several large, high-grade copper targets at El Quillay and Pedra Dura, with assay results expected in Q4 202513 . ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 6 In parallel, ongoing trenching is generating further high-priority targets across La Florida, El Quillay and Pedra Dura, with results also expected in Q4 202513 . These results highlight the strong distribution of copper mineralisation across multiple drill sections and confirm the high prospectivity of La Florida. Significantly, mineralisation is interpreted to have been intersected on the peripheral zones of a potential porphyry system, indicating vectors that warrant systematic follow-up drilling and further exploration along this mineralised corridor. Significant results are presented in Table 1, with the full assays provided in Appendix B. Drilling continues at El Quillay and Piedra Dura targets and results are expected in the coming weeks, this will be followed by a maiden drill program at Vista Montana. Figure 5: Section showing high-grade intercepts from diamond drillhole CMLFD005, purple interpreted to be andesitic porphyry. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 7 Table 1: La Florida Prospect significant diamond drilling results. Hole ID From (m) To (m) Width (m) Cu % Ag g/t CMLFD001 23.00 23.60 0.60 0.17 1.00 CMLFD002 14.00 20.65 6.65 1.03 2.96 CMLFD002 47.60 48.20 0.60 0.14 1.00 CMLFD002 65.50 67.40 1.90 0.88 2.63 CMLFD003 79.00 79.61 0.61 0.14 0.50 CMLFD003 90.00 91.60 1.60 0.30 0.50 CMLFD004 5.10 12.00 6.90 0.12 0.50 CMLFD004 74.00 74.70 0.70 0.12 1.00 CMLFD004 98.00 98.60 0.60 0.15 1.00 CMLFD004 100.00 101.00 1.00 0.20 1.00 CMLFD005 4.00 17.60 13.60 0.88 2.42 CMLFD005 10.00 16.10 6.10 1.35 2.82 CMLFD005 107.00 123.00 16.00 0.70 2.04 CMLFD005 115.00 122.47 7.47 1.36 2.97 CMLFD005 120.52 122.47 1.95 3.35 3.98 CMLFD006 15.00 21.05 6.05 0.10 1.17 CMLFD006 76.00 77.00 1.00 1.37 4.00 CMLFD007 3.88 6.70 2.82 0.27 4.26 CMLFD007 11.00 12.00 1.00 0.34 18.00 CMLFD008 32.00 32.95 0.95 0.11 1.00 CMLFD008 42.00 43.46 1.46 0.54 1.00 CMLFD008 49.60 52.60 3.00 0.61 1.25 CMLFD008 51.00 51.50 0.50 1.84 3.00 CMLFD008 51.50 53.55 2.05 0.28 0.88 CMLFD008 56.00 57.00 1.00 0.12 1.00 CMLFD008 60.00 61.89 1.89 0.15 2.00 Minimum grade: ≥0.1% Cu or ≥0.1 g/t Au, Minimum width: ≥ 0.5 meters (minimum sample), No Internal dilution applied. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 8 Figure 6: Drill rig drilling maiden diamond hole CMQD001 at El Quillay West. This announcement has been authorised by the Board of Directors of Culpeo Minerals Limited. COMPANY CONTACT Geoff McNamara Interim Executive Chairman E: geoff.mcnamara@culpeominerals.com.au P: +61 (08) 6383 7894 ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 9 ABOUT CULPEO MINERALS LIMITED Culpeo Minerals Limited is committed to copper exploration, discovery and development, with strategic assets in Chile, the world’s leading copper-producing nation. The Company is focused on high-grade copper systems within Chile’s infrastructure-rich Coastal Cordillera. Culpeo has recently announced a significant copper and molybdenum discovery at the Lana Corina Project and acquired the highly prospective Fortuna and Jupiter copper-gold projects. The Lana Corina and Fortuna Projects are located in Chile’s Coquimbo Region, approximately 350km north of Santiago, in proximity to the world-class Los Pelambres mine. The Jupiter Project is situated in the Antofagasta Region, renowned for hosting multiple tier-one copper and gold operations, including Escondida, Collahuasi and El Teniente. These project areas feature substantial outcropping high-grade copper systems, and importantly, they are supported by well-established regional infrastructure, including roads, power transmission lines, water sources and a strong local mining industry - factors critical in enabling cost-effective and efficient development. The Company is led by a highly experienced board and management team with more than two decades of operational and exploration experience in Chile. Culpeo’s objective is to deliver Shareholder value through the exploration, acquisition and development of high-grade, near-surface copper systems. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 10 COMPETENT PERSONS’ STATEMENTS The information in this report that relates to Exploration Results is based on information compiled by Mr Zeffron Reeves (B App Sc (Hons) Applied Geology) MBA, MAIG). Mr Reeves is a member of the Australian Institute of Geoscientists and a Director and shareholder of the Company. Mr Reeves has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Reeves consents to the inclusion in this report of the matters based on this information in the form and context in which it appears. The information in this announcement that relates to the historic Exploration Results as listed in the table below is based on, and fairly represents, information and supporting documentation prepared by the Competent Person whose name appears in the same row, who is a Director or shareholder of or independent consultant to the Company and is a Member of the Australasian Institute of Mining and Metallurgy (AusIMM), Australian Institute of Geoscientists (AIG), or a Recognised Professional Organisation (RPO). Each person named in the table below has sufficient experience which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he has undertaken to quality as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Activity Competent Person Membership Status Exploration Results (until 31 Oct 2024) Mr Maxwell Tuesley (Shareholder and former Director) AusIMM Member Exploration Results (after 31 Oct 2024) Mr Zeffron Reeves (Director and Shareholder) AIG Member The Company confirms that it is not aware of any new information or data that materially affects the Exploration Results information included in previous announcements. The Company confirms that the form and context in which the applicable Competent Persons’ findings are presented have not been materially modified from the previous announcements. FORWARD LOOKING STATEMENTS This document may include forward-looking statements. Forward-looking statements include, but are not limited to, statements concerning Culpeo Minerals Limited’s planned exploration program and other statements that are not historical facts. When used in this document, the words such as "could," "plan," "estimate," "expect," "intend," "may”, "potential," "should," and similar expressions are forward-looking statements. Although Culpeo Minerals Limited believes that its expectations reflected in these forward-looking statements are reasonable, such statements involve risks and uncertainties and no assurance can be given that actual results will be consistent with these forward-looking statements. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 11 APPENDIX A: JORC CODE TABLE 1 – FORTUNA PROJECT SECTION 1 SAMPLING TECHNIQUES AND DATA Criteria JORC Code explanation Commentary Sampling techniques Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down-hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling. • At La florida Culpeo has completed eight diamond drill holes for 1,408.45m. Diamond drill holes were drilled with HQ. Sampling was half core at geologically defined and significant mineralisation boundaries. • The CP considers the sampling methodologies to be appropriate for this style of mineralisation. • Diamond drilling was used to obtain half core samples of various lengths (minimum 0.25m), from which samples were delivered to ALS laboratories in Chile where the following analytical techniques were undertaken: Au-AA24, Au-GRA22, Cu-AA62, Mo-AA62 and Ag-AA62 Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation’ drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information. Drilling techniques Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc.). La Florida • Eight holes for a total of 1,408.45 metres of diamond drilling was undertaken. • Sampling and chemical analysis was undertaken for 1,010 samples, 1,010 analyses for copper, gold, silver and molybdenum. • Drill sample recovery Method of recording and assessing core and chip sample recoveries and results assessed. La Florida • Core recovery was estimated using the drillers recorded depth marks against the length of the core recovered. Reviewing the core photos, there are occasional shears/faults where core is broken. There is however no significant core loss. For the 2025 drilling program all HQ3 drilling is oriented, with bottom of hole marked. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. Logging Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. • For the drilling program, logging is undertaken for Lithology, Alteration, Mineralisation and Structural Controls. • Logging of diamond core was qualitative, and diamond core was photographed. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography. The total length and percentage of the relevant intersections logged. Sub-sampling techniques and sample preparation If core, whether cut or sawn and whether quarter, half or all core taken. La Florida • For the 2025 program, half core is sampled. • No percussion drilling has been completed. • The sample preparation of crushing half core at the lab to mm size prior to splitting off a 250g (either by cone/quarter or riffle) for pulverisation provides an appropriate and representative sample for analysis. • Half core was collected for the entirety of the Culpeo drilling, as such there was consistency throughout the drilling. Core was logged by If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in-situ material collected, ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 12 Criteria JORC Code explanation Commentary including for instance results for field duplicate/second- half sampling. a qualified geoscientist. Each sub-sample is considered to be representative of the interval. • Sampling of half core is representative of the in-situ material. • Sample sizes collected were considered appropriate to reasonably represent the material being tested Whether sample sizes are appropriate to the grain size of the material being sampled. Quality of assay data and laboratory tests The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. La Florida • For the 2025 drilling programs - standards and blanks are routinely inserted in sample batches and a QAQC program is in place. • Assays reported in this report were undertaken at the accredited laboratory of ALS Santiago, which is fully certified. Core samples of various lengths were assayed (minimum 0.25m) from which 250g of material was pulverized passing 200 mesh standards and blanks were regularly inserted in sample batches and monitored as part of the company’s QAQC procedure. • Standard chemical analyses were used for grade determination. There was no reliance on determination of analysis by geophysical tools. For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established. Verification of sampling and assaying The verification of significant intersections by either independent or alternative company personnel. La Florida • For the 2025 drilling program, a high-quality database is maintained, and protocols are in place to ensure this data is checked by both the Senior Geologist and Geology Manager. • No twin holes have been completed due to the early stage of the project. • Drilling is digitally entered and stored following documented core handling protocols. The protocols are considered adequate. The use of twinned holes. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Discuss any adjustment to assay data. Location of data points Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. La Florida • For the 2025 drilling program, hole collars are established using a handheld GPS, downhole surveys are undertaken using a north seeking gyroscope. • The grid system used PSAD56 19S. Specification of the grid system used. Quality and adequacy of topographic control. Data spacing and distribution Data spacing for reporting of Exploration Results. La Florida • Drill hole spacing is variable with holes targeted at specific geological features at this early stage of exploration. • No Mineral resource is being reported. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied Whether sample compositing has been applied. Orientation of data in relation to geological structure Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. La Florida • Drilling orientations are not considered to be biased with several drilling orientations used. • Generally, Drill holes were drilled across the interpreted strike of the mineralisation. If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. Sample security The measures taken to ensure sample security. • Chain of Custody of digital data is managed by the Company. Physical material was stored on site and, when necessary, delivered to the assay laboratory. Thereafter laboratory samples were controlled by the nominated ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 13 Criteria JORC Code explanation Commentary laboratory which to date is ALS Santiago. All sample collection was controlled by digital sample control file(s) and hardcopy ticket books. Audits or reviews The results of any audits or reviews of sampling techniques and data. • No audits have been undertaken. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 14 SECTION 2 REPORTING OF EXPLORATION RESULTS Criteria JORC Code explanation Commentary Mineral tenement and land tenure status Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. • The Fortuna Project area comprises 21 exploitation concessions, which cover a total area of approximately 1,775 Hectares. Culpeo Minerals has agreements in place to earn up to 80%. Exploration done by other parties Acknowledgment and appraisal of exploration by other parties. • Historic exploration was undertaken by Inversiones Em Dos Limitada from 2007 to the present. • Alara Resources undertook a 17 hole drilling program at El Quillay from 2011 to 2012 and also undertook an IP geophysical survey. Geology Deposit type, geological setting, and style of mineralisation. • The Fortuna Project is associated with a structural belt orientated in a NS / NW direction, about 6km long and 500m wide. Mineralisation is predominantly copper with accessory gold, silver, and molybdenum. Mineralisation is structurally controlled and associated with breccias and intrusive units. Drillhole Information A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all material drillholes: • easting and northing of the drillhole collar • elevation or RL (elevation above sea level in metres) of the drillhole collar • dip and azimuth of the hole • down hole length and interception depth hole length • A summary of the 2025 drilling program is provided in Appendix B. Data aggregation methods In reporting exploration results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually material and should be stated. • No cutting of grades has been undertaken at this early stage of exploration drilling. • Significant results are calculated using a length weighted averaging method. Relationship between mineralisation widths and intercept lengths If the geometry of the mineralisation with respect to the drillhole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’). • True width of mineralisation is unknown. Diagrams Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include, but not be limited to, a plan view of drillhole collar locations and appropriate sectional views. • Diagrams are included in the main body of the report. Balanced reporting Where comprehensive reporting of all exploration results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of exploration results. • Results have been reported for the main elements targeted (Cu, Ag, Au, and Mo). Other substantive exploration data Other exploration data, if meaningful and material, should be reported including, but not limited to, geological observations; geophysical survey results; geochemical survey results; bulk • N/A ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 15 Criteria JORC Code explanation Commentary samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. Further work The nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large-scale step-out drilling). • Surface mapping and sampling programs are ongoing over the advanced targets identified. • Diamond drilling holes recently commenced at El Quillay and Pedra Dura. ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 16 APPENDIX B: DIAMOND DRILLING COLLAR LOCATIONS AND HOLE DETAILS Hole Easting Northing RL Dip Azimuth Depth Comment CMLFD001 297641 6579251 1072 -60 45 258 Completed CMLFD002 297790 6579202 1114 -60 310 249 Completed CMLFD003 297878 6579383 1100 -60 318 126 Completed CMLFD004 297758 6578953 1128 -62 284 129 Completed CMLFD005 297904 6578800 1181 -60 290 158 Completed CMLFD006 297533 6578327 1113 -60 321 120 Completed CMLFD007 297593 6579746 994 -60 333 198 Completed CMLFD008 297878 6579071 1129 -60 315 170 Completed APPENDIX C: DIAMOND DRILLING SAMPLING RESULTS LA FLORIDA Hole_ID Samp_ID From To Au_ppm Cu_% Mo_% Ag_ppm CMLDF001 CPO0013268 5.9 6.7 0.005 0.046 0.002 1 CMLDF001 CPO0013269 6.7 7.6 <0.005 0.025 0.001 1 CMLDF001 CPO0013270 7.6 8.3 0.005 0.006 0.001 1 CMLDF001 CPO0013271 8.3 9 <0.005 0.008 0.001 <1 CMLDF001 CPO0013272 9 10 0.005 0.008 0.001 1 CMLDF001 CPO0013273 10 11 <0.005 0.006 0.001 <1 CMLDF001 CPO0013274 11 12 0.005 0.014 0.001 1 CMLDF001 CPO0013275 12 13 0.005 0.006 0.001 <1 CMLDF001 CPO0013276 13 13.5 0.005 0.004 0.001 <1 CMLDF001 CPO0013277 13.5 14.2 <0.005 0.004 0.001 <1 CMLDF001 CPO0013278 14.2 14.7 <0.005 0.005 0.001 <1 CMLDF001 CPO0013279 14.7 15.2 <0.005 0.003 0.001 <1 CMLDF001 CPO0013280 15.2 16 0.01 0.003 0.001 1 CMLDF001 CPO0013281 16 16.5 <0.005 0.003 0.001 1 CMLDF001 CPO0013282 16.5 17 <0.005 0.005 0.001 <1 CMLDF001 CPO0013283 17 17.5 <0.005 0.006 0.001 <1 CMLDF001 CPO0013284 17.5 18 0.006 0.011 0.001 <1 CMLDF001 CPO0013285 18 18.5 0.006 0.025 0.001 <1 CMLDF001 CPO0013286 18.5 19 0.006 0.006 0.001 1 CMLDF001 CPO0013287 19 19.5 0.006 0.003 0.001 1 CMLDF001 CPO0013289 19.5 20 0.006 0.004 0.001 <1 CMLDF001 CPO0013290 20 20.5 0.006 0.003 0.001 <1 CMLDF001 CPO0013291 20.5 21.27 0.006 0.018 0.001 <1 CMLDF001 CPO0013292 21.27 22 0.006 0.02 0.001 <1 CMLDF001 CPO0013293 22 22.5 <0.005 0.011 0.001 <1 CMLDF001 CPO0013294 22.5 23 0.005 0.074 0.002 1 CMLDF001 CPO0013295 23 23.6 0.012 0.166 0.001 1 CMLDF001 CPO0013296 23.6 24.1 0.005 0.1 0.001 <1 CMLDF001 CPO0013297 24.1 25.05 <0.005 0.011 0.001 1 CMLDF001 CPO0013298 25.05 26.05 0.005 0.01 0.001 1 ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 17 Hole_ID Samp_ID From To Au_ppm Cu_% Mo_% Ag_ppm CMLDF001 CPO0013299 26.05 27 0.009 0.007 0.001 <1 CMLDF001 CPO0013300 27 28 <0.005 0.001 0.001 <1 CMLDF001 CPO0013301 28 29 0.005 0.002 0.001 1 CMLDF001 CPO0013302 29 30 <0.005 0.001 0.001 1 CMLDF001 CPO0013303 30 31 0.007 0.001 0.001 1 CMLDF001 CPO0013304 31 32 <0.005 0.001 0.001 <1 CMLDF001 CPO0013305 32 33 0.006 0.009 0.001 1 CMLDF001 CPO0013306 33 34 <0.005 0.005 0.001 1 CMLDF001 CPO0013307 34 35 <0.005 0.001 0.001 1 CMLDF001 CPO0013309 35 36 <0.005 0.001 0.001 1 CMLDF001 CPO0013310 36 37 <0.005 0.002 0.001 1 CMLDF001 CPO0013311 37 38 <0.005 0.001 0.001 1 CMLDF001 CPO0013312 38 39 <0.005 <0.001 0.001 1 CMLDF001 CPO0013313 39 40 <0.005 0.001 0.001 <1 CMLDF001 CPO0013314 40 40.5 0.007 <0.001 0.001 1 CMLDF001 CPO0013315 40.5 41 <0.005 <0.001 0.001 <1 CMLDF001 CPO0013316 41 42 <0.005 <0.001 0.001 <1 CMLDF001 CPO0013317 42 43 <0.005 0.001 0.001 1 CMLDF001 CPO0013319 43 44 <0.005 0.001 0.001 1 CMLDF001 CPO0013320 44 45 <0.005 0.002 <0.001 1 CMLDF001 CPO0013321 45 46 <0.005 0.001 <0.001 1 CMLDF001 CPO0013322 46 47 <0.005 0.002 0.001 1 CMLDF001 CPO0013323 47 48 0.006 0.001 0.001 1 CMLDF001 CPO0013324 48 49 <0.005 0.001 0.001 <1 CMLDF001 CPO0013325 49 49.6 0.006 0.001 0.001 <1 CMLDF001 CPO0013326 49.6 50.6 0.005 0.001 0.001 <1 CMLDF001 CPO0013327 50.6 51.6 <0.005 0.001 <0.001 <1 CMLDF001 CPO0013329 58 59 <0.005 0.002 0.001 <1 CMLDF001 CPO0013330 59 59.86 <0.005 <0.001 0.001 1 CMLDF001 CPO0013331 59.86 60.6 0.006 0.001 <0.001 1 CMLDF001 CPO0013332 60.6 61.48 0.009 0.004 0.001 1 CMLDF001 CPO0013333 61.48 62.6 <0.005 0.001 0.001 <1 CMLDF001 CPO0013334 85.2 86.2 <0.005 0.002 0.001 2 CMLDF001 CPO0013335 86.2 86.7 <0.005 <0.001 0.001 1 CMLDF001 CPO0013336 86.7 87.7 <0.005 0.001 0.001 2 CMLDF001 CPO0013337 94.8 95.5 <0.005 <0.001 0.001 <1 CMLDF001 CPO0013338 98 99 <0.005 <0.001 0.001 1 CMLDF001 CPO0013339 99 100 <0.005 0.001 <0.001 1 CMLDF001 CPO0013340 100 101 <0.005 0.001 0.001 1 CMLDF001 CPO0013341 101 102 0.005 0.001 0.001 1 CMLDF001 CPO0013342 125.78 126.5 <0.005 0.002 0.001 1 CMLDF001 CPO0013343 136.29 137.29 <0.005 0.002 0.001 1 CMLDF001 CPO0013344 137.29 137.79 <0.005 0.001 0.001 1 CMLDF001 CPO0013345 137.79 138.79 <0.005 0.001 0.001 <1 ASX ANNOUNCEMENT 7 OCTOBER 2025 PAGE | 18 Hole_ID Samp_ID From To Au_ppm Cu_% Mo_% Ag_ppm CMLDF001 CPO0013346 165 166 <0.005 0.003 0.001 <1 CMLDF001 CPO0013347 166 167 <0.005 0.022 0.001 1 CMLDF001 CPO0013349 167 168 0.005 0.003 0.001 1 CMLDF001 CPO0013350 170.74 171.74 <0.005 0.006 0.001 2 CMLDF001 CPO0013351 171.74 172.74 <0.005 0.003 0.001 1 CMLDF001 CPO0013352 172.74 173.5 <0.005 0.004 0.001 1 CMLDF001 CPO0013353 185.65 186.15 <0.005 <0.001 0.001 1 CMLDF001 CPO0013354 186.15 187.15 <0.005 0.001 0.001 1 CMLDF001 CPO0013355 187.15 188.15 0.006 0.001 0.001 2 CMLDF001 CPO0013356 198.5 199.48 <0.005 0.001 0.001 1 CMLDF001 CPO0013357 199.48 200 0.009 0.001 0.001 2 CMLDF001 CPO0013359 200 201 0.008 0.002 0.001 3 CMLFD002 CPO0013360 4.1 5.1 0.005 0.05 0.001 2 CMLFD002 CPO0013361 5.1 6.1 <0.005 0.023 <0.001 <1 CMLFD002 CPO0013362 6.1 7 <0.005 0.012 <0.001 <1 CMLFD002 CPO0013363 7 9.75 <0.005 0.013 <0.001 2 CMLFD002 CPO0