High-Grade Surface Cu and Au Confirmed At El Quillay South
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
29 FEBRUARY 2024
ASX:CPO OTCQB:CPORF
HIGH-GRADE SURFACE COPPER AND GOLD MINERALISATION
CONFIRMED AT EL QUILLAY SOUTH PROSPECT
Culpeo Minerals Limited (Culpeo or the Company) (ASX:CPO, OTCQB:CPORF) is pleased to
announce assay results returned from the first round of field exploration at the El Quillay South
Prospect, Fortuna Project (the Project). Rock chip sampling has extended the strike length of El
Quillay South and confirmed significant surface copper and gold mineralisation over a total length
of 1,200m and up to 100m wide. This elevates the prospectivity of the 3km-long El Quillay Fault zone
and adds significant dimension to the Company’s exploration strategy for the Project.
HIGHLIGHTS
•
First round rock chip sampling at El Quillay South has extended the strike length to 1,200m and
identified high-grade copper and gold mineralisation (see Figure 2).
•
Assays returned grades up to 1.33% Cu and 2.40g/t Au, with 11 of the 18 rock chip samples
collected returning assays greater than 0.5% Cu (see Figure 1).
•
The El Quillay Fault spans >3km and links the El Quillay South, Central and North Prospects
where drilling returned an intersection of 26m @ 0.81% CuEq (refer ASX announcement 17th
January 2024).
•
Mapping and sampling identified an additional parallel mineralised zone, El Quillay East.
•
New breccia targets defined at Lana Corina and Vista Montana are scheduled for drilling in
the coming weeks.
Culpeo Minerals’ Managing Director, Max Tuesley, commented:
“The encouraging surface sampling results at the El Quillay South Prospect confirm significant copper
and gold mineralisation along a strike length of 1,200m and provide new drill targets for immediate
follow-up. This sampling program continues to demonstrate that the 3km-long fault structure linking
the El Quillay North and South Prospects is intimately associated with copper mineralisation and
provides a highly prospective setting for further exploration within the Fortuna Project.”
CULPEOMINERALS.COM.AU
info@culpeominerals.com.au
Level 48, 152-158 St Georges Terrace, Perth WA 6000
61 (8) 6311 9160
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Figure 1: Shallow high-grade copper and gold from sample CPO0008703 with 1.33% Cu at El Quillay
South.
EL QUILLAY SOUTH SURFACE MAPPING AND SAMPLING
The El Quillay South Prospect is hosted within a >3km long regional fault zone (El Quillay Fault)
where copper and gold mineralisation has historically been exploited by small scale surface and
underground mining (see Figures 2 and 3).
The rock chip samples were taken from historic workings, outcrop, and subcrop locations situated
on hills where bedrock or fresh rock was exposed, within an area 1,200m along strike north-south
and 100m across-strike east-west, defined from alteration and visible copper occurrence (refer Table
1).
Sampling within the large zone of anomalous copper and gold yielded grades up to 1.33% Cu
(see Figure 1) with high grade gold mineralisation up to 2.40g/t Au also returned. Encouragingly,
abundant chalcopyrite was observed near surface, indicating a shallow oxidation depth at the
prospect.
PAGE | 2
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Figure 2: Plan view of El Quillay South Prospect, showing surface sampling results. Datum PSAD56 19S
Table 1: Assay Results from El Quillay South Sampling Program
Sample Number
CPO0008697
CPO0008698
CPO0008699
CPO0008701
CPO0008702
CPO0008703
CPO0008704
CPO0008705
CPO0008706
CPO0008707
CPO0008708
CPO0008709
CPO0008711
CPO0008712
CPO0008713
CPO0008714
CPO0008715
CPO0008716
Cu %
0.872
0.463
0.209
1.259
0.449
1.328
1.052
1.098
0.356
0.336
0.787
1.125
0.843
0.225
1.267
0.81
0.625
1.131
Au g/t
1.495
0.03
0.37
0.417
0.388
0.397
0.745
0.046
0.524
0.289
0.955
0.252
0.788
1.55
1.525
2.4
0.251
0.475
Easting
298328
298330
298342
298346
298352
298335
298336
298329
298355
298354
298360
298377
298385
298378
298370
298332
298310
298316
Northing
6569053
6569042
6569036
6569045
6569037
6569025
6568997
6569188
6569479
6569484
6569496
6569492
6569499
6569525
6569576
6569633
6569642
6569723
PAGE | 3
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Figure 3: Plan view of the El Quillay Prospect (ASX announcement 17 January 2024).
(CMEQD002 results refer to ASX announcement 17 January 2024, El Quillay Central and South historic sampling results refer ASX
announcement 17 January 2024, El Quillay North historic sampling results refer to ASX announcement 11 September 2023, Piedra
Dura recent sampling results refer to ASX announcement 1 November 2023 and 12 December 2023), (Refer Appendix D for copper
equivalent calculation methodology). Dashed line indicates location of Figure 1.
EL QUILLAY AND VACA MUERTA DRILLING PROGRAM
Drillhole CMEQD002 (see Figure 3) at El Quillay North was designed to test the known copper
mineralisation mapped at surface and previously sampled underground (refer ASX announcement
11 September 2023 and 17 January 2024).
Results returned from a downhole depth of 15.2m to 21m, reported a zone of oxide mineralisation
of 5.8m grading 0.78% CuEq. From a downhole depth of 29m to 55m, a wider zone of sulphide
mineralisation was intersected returning 26m and grading 0.81% CuEq. This wider intersection also
returned a high-grade zone of 4m of 1.87% CuEq from 51 to 55m including 1m of 2.16% CuEq
from 51m (refer ASX announcement 17 January 2024).
Core samples from the remaining drill hole from El Quillay North and the two drill holes from Vaca
Muerta have been sent to the laboratory for multi element ICP analysis and are expected to be
reported within four to six weeks.
PAGE | 4
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
NEXT STEPS
The 2024 Exploration Program at the Fortuna Project is progressing with the following key activities:
•
Regional mapping programs are ongoing along the 3km El Quillay Fault, with a focus on
El Quillay Central and El Quillay East, where an additional mineralised zone parallel to the
El Quillay Fault has been identified.
•
An extensive litho-geochemical survey has begun at La Florida where previous surface
sampling (with grades up to 3.96% Cu, refer ASX announcement 4 January 2024) discovered
a large zone of copper-gold mineralisation associated with a porphyritic intrusion.
•
New breccia targets defined at Lana Corina and Vista Montana are scheduled for drilling in
the coming weeks.
•
The remaining drill core from El Quillay North and the two drill holes from Vaca Muerta have
been sent for multi element ICP analysis and are expected to be reported within four to six
weeks.
FORTUNA PROJECT
The Fortuna Project is located 10km north of the Lana Corina Project (see Figure 4) and consists of
eight identified prospects: Vaca Muerta, Piedra Dura, La Florida, El Quillay North, El Quillay Central,
El Quillay South, El Quillay East and Lucero. Extensive outcropping copper mineralisation and historic
small scale mining operations are present throughout the Project area.
PAGE | 5
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Figure 4: Regional map showing location of new Fortuna concessions adjacent to the
Lana Corina Project
(For the Lana Corina Drilling Results, refer to ASX announcements; 11 May 2022, 6 June 2022 and 23 November 2022, Vaca
Muerta historic sampling results refer to ASX announcement 7 August 2023; El Quillay North historic sampling results refer
to ASX announcement 11 September 2023; Piedra Dura sampling results refer to ASX announcement 1 November 2023
and 12 December 2023; Lucero recent sampling results refer to ASX announcement 21 November 2023 and La Florida
results refer ASX announcement 4 January 2024), (Refer Appendix D for copper equivalent calculation methodology).
PAGE | 6
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
This announcement has been authorised by the Board of Directors of Culpeo Minerals Limited.
COMPANY
Max Tuesley
Managing Director
E: max.tuesley@culpeominerals.com.au
P: +61 (08) 6311 9160
PAGE | 7
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
ABOUT CULPEO MINERALS LIMITED
Culpeo Minerals is a copper exploration and development company with assets in Chile, the
world’s number one copper producer. The Company is exploring and developing high-grade
copper systems in the coastal Cordillera region of Chile.
The Company has made a new discovery at Lana Corina (refer ASX Announcement 11 May 2022)
and has recently acquired the Fortuna Project (refer ASX announcement 7 August 2023), which
hosts a suite of promising exploration targets. Both projects are situated in the Coquimbo region
of Chile and contain significant outcropping high-grade copper mineralisation which offers
multiple walk-up drill targets.
Culpeo Minerals has a strong board and
management team with significant Chilean
country expertise and has an excellent incountry network. All these elements enable the
Company to gain access to quality assets in a
non-competitive environment. We leverage the
experience and relationships developed over 10
years in-country to deliver low cost and effective
discovery and resource growth. We aim to create
value for our shareholders through exposure to
the acquisition, discovery and development of
mineral properties which feature high grade,
near surface copper mineralisation.
COMPETENT PERSONS’ STATEMENTS
The information in this announcement that relates to Exploration Results is based on information
compiled by Mr. Maxwell Donald Tuesley, BSc (Hons) Economic Geology, MAusIMM (No 111470).
Mr. Tuesley is a member of the Australian Institute of Mining and Metallurgy and is a shareholder
and Director of the Company. Mr. Tuesley has sufficient experience that is relevant to the style
of mineralisation and type of deposit under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian
Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. The Company
confirms it is not aware of any new information or data that materially affects the information
included in the relevant market announcement.
PAGE | 8
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
APPENDIX A: JORC CODE TABLE 1 – FORTUNA PROJECT
SECTION 1 SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific specialised
industry standard measurement tools
appropriate to the minerals under
investigation, such as down-hole gamma
sondes, or handheld XRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of sampling.
El Quillay
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or
systems used.
Aspects of the determination of mineralisation
that are Material to the Public Report. In
cases where ‘industry standard’ work has been
done this would be relatively simple (e.g.
‘reverse circulation’ drilling was used to obtain
1 m samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’). In
other cases more explanation may be
required, such as where there is coarse gold
that has inherent sampling problems.
Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant
disclosure of detailed information.
• 17 holes for a total of 4,683.33
meters, were completed historically.
• Sampling and analysis was
undertaken for 570 samples, 570
analyses for copper; 480 analyses
for gold and 26 analyses for silver.
• In November 2023, 5 stockpile
samples were taken. The samples
were delivered to ALS laboratories
in Chile where the following
analytical techniques were
undertaken Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
• Two diamond drill holes were
completed in December 2023, the
core was cut and sent to ALS
laboratories in Chile where the
following analytical techniques were
undertaken: Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
• 18 surface rock chip samples were
taken at El Quillay South in
February 2024. The samples were
delivered to ALS laboratories in
Chile where the following analytical
techniques were undertaken AuAA24, Au-GRA22, Cu-AA62, MoAA62 and Ag-AA62.
Vaca Muerta
Sampling and Chemical Analysis
was undertaken for 260 samples,
260 analyses for copper and 105
analyses for silver.
• No known historic drilling was
undertaken.
• A two-hole drilling program was
initiated in December 2023 and was
completed during January 2024.
• Core samples were cut and sent to
ALS laboratories in Chile where the
following analytical techniques were
undertaken: Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
La Florida
•
PAGE | 9
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
Commentary
Sampling and Chemical Analysis
was undertaken for 110 samples,
110 analyses for copper, 10
analyses for gold and 10 analyses
for silver.
• No known drilling undertaken.
• During November 2023, 14 samples
were taken from old workings,
outcrop and subcrop locations
where bedrock/fresh rock was
visible.
• The samples were delivered to ALS
laboratories in Chile where the
following analytical techniques were
undertaken: Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
Piedra Dura
• During October 2023, 47 samples
were taken from old workings,
outcrop and subcrop locations
where bedrock/fresh rock was
visible.
• In November 2023, an additional 27
samples were taken from within the
main Piedra Dura structure and also
a parallel structure to the northeast.
• The samples were delivered to ALS
laboratories in Chile where the
following analytical techniques were
undertaken: Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
Lucero
• During November 2023, 36 samples
were taken from outcrop and
subcrop locations where
bedrock/fresh rock was visible.
• The samples were delivered to ALS
laboratories in Chile where the
following analytical techniques were
undertaken: Au-AA24, Au-GRA22,
Cu-AA62, Mo-AA62 and Ag-AA62.
•
Drilling
techniques
Drill type (e.g. core, reverse circulation, openhole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter,
triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether
• Historic Drilling has only been
undertaken at El Quillay (North,
Central and South) and this was prior
to Culpeo’s involvement.
• 17 holes for a total of 4,683.33
PAGE | 10
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
core is oriented and if so, by what method,
etc.).
Commentary
meters, were completed 10 were of
the DD type, with 2,699.33 meters,
and 7 corresponded to RC, with
1,984 meters. 14 holes were drilled at
El Quillay North, 2 at El Quillay
Central and 1 at El Quillay South.
• A 4 hole diamond drilling program
has recently been completed at El
Quillay and Vaca Muerta, with
drilling undertaken using HQ3 and
NQ3 techniques.
Drill sample
recovery
Method of recording and assessing core and
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential
loss/gain of fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc.)
photography.
• The historic drill samples were taken
before Culpeo’s involvement, and no
records are available detailing drill
core recovery.
• For the 2023/2024 drilling program,
core recoveries have been >95%.
• Partial records exist for the historic
drill core logs.
• For the 2023/2024 drilling program,
all core is logged for lithology,
mineralisation style, structure and
alteration.
The total length and percentage of the
relevant intersections logged.
Sub-sampling
techniques and
sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
• No records available for the historic
drilling.
If non-core, whether riffled, tube sampled,
rotary split, etc. and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling is
representative of the in-situ material
collected, including for instance results for
field duplicate/second-half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
PAGE | 11
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
Commentary
Quality of
assay data and
laboratory
tests
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• The sample preparation techniques
for historical drilling are unknown.
For geophysical tools, spectrometers,
handheld XRF instruments, etc., the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied and
their derivation, etc.
• Historical analysis has focussed on
Cu, but some of the samples were
also analysed for Mo, Ag and Au.
• For the 2023/2024 program
standards and blanks were regularly
inserted in sample batches and
monitored as part of the company’s
QAQC procedure.
Nature of quality control procedures adopted
(e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and
precision have been established.
Verification of
sampling and
assaying
The verification of significant intersections by
either independent or alternative company
personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Location of
data points
Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Data spacing
and
distribution
• Company geologists have verified
the visible copper mineralisation
present in outcrop and in stockpiles
at the project site.
• All logging and sampling is
undertaken using the company’s
procedure manual and chain of
custody protocols.
• Historic Location of drillhole collars
and surface samples were recorded
by handheld GPS. Accuracy is not
known but is considered reasonable
for early-stage exploration.
Quality and adequacy of topographic control.
• The 2023/2024 sample locations
were picked up using a hand-held
GPS unit.
Data spacing for reporting of Exploration
Results.
• The historical drilling and surface
sampling are widely spaced and no
systematic sampling/drilling grid has
been implemented. In general, the
mineralisation strikes in a northsouth / north-west direction and
historic drilling has been undertaken
perpendicular to that.
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied
Whether sample compositing has been
applied.
Orientation of
data in
relation to
• No twin holes have been completed
due to the early stage of the project.
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
• Historic drilling and channel
sampling orientations are not
considered to be biased with several
drilling orientations used.
PAGE | 12
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
Commentary
geological
structure
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
• For the 2023/2024 drilling program,
holes have been aligned
perpendicular to the strike of the
mapped surface mineralisation.
Sample
security
The measures taken to ensure sample security.
Audits or
reviews
The results of any audits or reviews of
sampling techniques and data.
• No records available for the historic
samples.
• For the 2023 program, samples are
delivered to the laboratory using the
company’s chain of custody
procedure.
• No records are available for the
historic sampling, but it is assumed
no audits have been completed.
SECTION 2 REPORTING OF EXPLORATION RESULTS
Criteria
JORC Code explanation
Commentary
Mineral tenement
and land tenure
status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The Fortuna project area
comprises twenty-one
exploitation concessions, which
cover a total area of
approximately 1,775 Hectares.
Culpeo Minerals has
agreements in place to earn up
to 80%.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Exploration done
by other parties
Acknowledgment and appraisal of exploration
by other parties.
• Historic exploration was
undertaken by Inversiones Em
Dos Limitada from 2007 to the
present.
• Alara Resources undertook a
17 hole drilling program at El
Quillay from 2011 to 2012 and
also undertook a IP
geophysical survey.
Geology
Deposit type, geological setting and style of
mineralisation.
• The Fortuna project is
associated with a structural belt
orientated in a NS / NW
direction, about 6km long and
500m wide. Mineralisation is
predominantly copper with
accessory gold, silver and
molybdenum. Mineralisation is
structurally controlled and
associated with breccias and
intrusive units
Drillhole
Information
A summary of all information material to the
understanding of the exploration results
• A summary of the historic
drillholes is provided in
PAGE | 13
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
including a tabulation of the following
information for all Material drillholes:
• easting and northing of the drillhole collar
• elevation or RL (elevation above sea level in
metres) of the drillhole collar
Commentary
Appendix B.
• For the 2023 program the
drillhole locations are provided
in Appendix C.
• dip and azimuth of the hole
• down hole length and interception depth
hole length
Data aggregation
methods
Relationship
between
mineralisation
widths and
intercept lengths
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of
high grades) and cut-off grades are usually
Material and should be stated.
If the geometry of the mineralisation with
respect to the drillhole angle is known, its
nature should be reported.
If it is not known and only the down hole
lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole length,
true width not known’).
• Only raw assay results have
been reported.
• Only down hole lengths have
been reported with respect to
drilling intercepts, true width of
mineralisation is unknown.
Diagrams
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for
any significant discovery being reported These
should include, but not be limited to a plan view
of drill hole collar locations and appropriate
sectional views.
• Diagrams are included in the
main body of the report.
Balanced
reporting
Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
• Results have been reported for
the main elements targeted
(Cu, Ag, Au and Mo). All
historic drillhole locations are
reported for context.
Other substantive
exploration data
Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations; geophysical
survey results; geochemical survey results; bulk
samples – size and method of treatment;
metallurgical test results; bulk density,
groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
•
Further work
The nature and scale of planned further work
(e.g. tests for lateral extensions or depth
extensions or large-scale step-out drilling).
A IP Geophysical Survey: IP
was completed at El Quillay
over an area of 3,500 x 2,100
m, which included the sectors
of El Quillay North, Quillay
Central and Quillay South.
• The company initiated a
review of the historic
geophysical data and results
from this study are expected
in March 2024.
• Surface mapping and sampling
programs are ongoing over the
advanced targets identified.
• Two diamond drill holes have
PAGE | 14
CULPEOMINERALS.COM.AU
ASX ANNOUNCEMENT 29 FEBRUARY 2024
Criteria
JORC Code explanation
Commentary
recently been completed at the
El Quillay North Prospect and
Two diamond drillholes
completed at the Vaca Muerta
prospect.
Appendix B
Details of Historic Drilling – Fortuna Project
Hole ID
Easting
Northing
RL
Dip
Azimuth
Depth
Q DD -0 1
Q DD -0 2
Q DD -0 3
Q DD -0 4
Q R C-5 A
Q DD -0 6
Q DD -0 7
Q DD -0 8
Q R C-0 9
Q R C-1 0
Q DD -1 1
Q DD -1 2
Q R C-1 3
Q R C-1 4
Q R C-1 5
Q DD -1 6
Q DD -1 7
2 9 72 50 .5
2 9 71 72 .9
2 9 70 59 .9
2 9 71 23 .0
2 9 70 94 .8
2 9 70 72 .0
2 9 69 73 .0
2 9 69 19 .2
2 9 72 35 .0
2 9 70 50 .0
2 9 69 00 .0
2 9 70 36 .6
2 9 68 01 .4
2 9 67 57 .0
2 9 76 55 .0
2 9 77 10 .0
2 9 82 84 .0
6 5 71 20 1.4
6 5 71 25 4.4
6 5 71 17 0.3
6 5 71 11 5.0
6 5 71 24 2.9
6 5 71 28 5.0
6 5 71 19 8.0
6 5 72 28 4.5
6 5 72 01 4.0
6 5 71 06 1.0
6 5 71 13 4.0
6 5 71 00 1.5
6 5 71 30 4.3
6 5 70 86 4.0
6 5 70 59 3.0
6 5 70 45 6.0
6 5 69 55 0.0
7 6 6.9
7 6 9.2
7 5 7.9
7 6 8.0
7 5 7.5
7 5 3.0
7 5 3.0
7 6 1.0
7 7 0.0
7 6 0.0
7 5 3.0
7 7 9.0
7 6 8.7
7 8 3.0
7 6 6.0
7 7 9.0
8 3 1.0
- 55
- 55
- 50
- 55
- 55
- 50
- 50
- 58
- 58
- 58
- 90
- 50
- 58
- 90
- 60
- 55
-5
56
52
52
56
56
50
50
50
50
56
0
56
55
0
70
70
90
190
344
311
391
391
240
319
272
331
296
251
371
300
172
170
200
161
Appendix C
2023/24 Drilling Program – Fortuna Project
Hole ID
Easting
Northing
RL
Dip
Azimuth
Depth
CMEQ D0 01
CMEQ D0 02
CMV MD001
CMV MD002
2 9 73 38
2 9 73 00
2 9 95 43
2 9 99 41
6 5 71 28 0
6 5 71 28 9
6 5 68 70 1
6 5 68 67 7
774
784
767
677
- 60
- 60
- 60
- 50
45
30
40
170
5 2 .3
8 6 .3
1 4 9.2
1 8 5.9
Appendix D
Notes for Reporting of Copper Equivalent Grades
Copper Equivalent (Cu Eq) values: Assumed commodity prices for the calculation of Copper Equivalent (Cu Eq) is Cu US$3.00/lb, Au
US$1,700/oz, Mo US$14/lb and Ag US$20/oz. Recoveries are assumed from similar deposits: Cu = 85%, Au = 65%, Ag = 65%, Mo = 80%,
Cu Eq (%) was calculated using the following formula: ((Cu% x Cu price 1% per tonne x Cu recovery) + (Au(g/t) x Au price per g/t x Au
recovery) + (Mo ppm x Mo price per g/t x Mo recovery) + Ag ppm x Ag price per g/t x Ag recovery)) / (Cu price 1% per tonne x Cu
recovery). Cu Eq (%) = Cu (%) + (0.54 x Au (g/t)) + (0.00037 x Mo (ppm)) + (0.0063 x Ag (ppm)). It is the Company’s opinion that all
elements included in the metal equivalents have a reasonable potential to be recovered and sold.
PAGE | 15
CULPEOMINERALS.COM.AU
Share your feedback
Discover